rino
March 27th, 2005, 11:11 PM
Found this on the nobra site might help any one who is still drawing upther frame plan
110.1 Wheelbase and Stool Regulations: From center of front axial to the center of the rear axial dimension will be not exceed 29 inches. From the farthest outside of the tire to the same on the other side will not exceed 40 inches. The barstool must be constructed of an original barstool. The minimum height to the top of the stool is 28 inches with a maximum of 2 inches of foam or padding of any kind.
110.1 Wheelbase and Stool Regulations: From center of front axial to the center of the rear axial dimension will be not exceed 29 inches. From the farthest outside of the tire to the same on the other side will not exceed 40 inches. The barstool must be constructed of an original barstool. The minimum height to the top of the stool is 28 inches with a maximum of 2 inches of foam or padding of any kind.