fully independent suspension

[holdercustomz]

has anyong tried or thought of making a bsr with front and rear independent suspension?

[VashRazr83]

I had thought of that...but my buddy pointed out that i wouldn't want it to tip anymore then it does...and the only thing he would do would be the front and leave a rigid rear...this keeps you in control a little more.

[BFORTNER]

I had thought of that...but my buddy pointed out that i wouldn't want it to tip anymore then it does...and the only thing he would do would be the front and leave a rigid rear...this keeps you in control a little more.

yeah just like VASH said. with indi. front and rear you would need a sway-bar set up to help keep you from leaning from side to side since you are up so high on the stool.

[el~bryce~o]

i found a site that has done a thing like it looks pritty cool
http://images.google.com.au/imgres?imgurl=http://www.pcpoffroad.com/images/bar_stool3.jpg&imgrefurl=http://www.pcpoffroad.com/&h=128&w=172&sz=6&hl=en&start=62&tbnid=OUL3x02__lJ8aM:&tbnh=74&tbnw=100&prev=/images%3Fq%3Dbar%2Bstool%2Bracer%26start%3D60%26ndsp%3D20%26hl%3Den%26safe%3Doff%26rlz%3D1T4SKPB_enAU248AU248%26sa%3DN

[JChatt]

i thought about it, but i figured it would require too much work

JChatt

[Ironfist104]

Check out my bsr it has a front end on it it works fine I cranked my spring to max it has just enough to smoth out the big bumps but not to soft to create bump steer.....
http://barflyracers.com/showthread.php?t=502

[Chevyboy_0]

I had thought about a swing arm in back with a straight axle front end. but not independent front and rear

[rmkforever]

A friend and myself are doing independent front and a swing arm in the rear. Its about half designed and a quarter made...we have the swing arm done we are starting the rest of the stuff soon. A-arms in the front end are a little tricky.

[cujo]

A friend and myself are doing independent front and a swing arm in the rear. Its about half designed and a quarter made...we have the swing arm done we are starting the rest of the stuff soon. A- arms in the front end are a little tricky.My name is Cujo, ( Home of the Dogpound Chassis) I'm building a barstool racer with independent front, and swing arm rear . I'll post pictures of them shortly on facebook. look under Terri Gauthier on facebook,you'll see some pictures of my online racing simulator there that I built.
Thanks,
Cujo (Sin City Ironworkers Local #433 LV,NV)