PDA

View Full Version : Round Tube Tools

Mike Bean
March 29th, 2005, 11:58 PM
Rino,

Where are the pics? I am curious to see what you have..

mbean
rino
March 31st, 2005, 06:51 PM
ok I will just send them as attachments
SupraLuda
April 11th, 2005, 12:37 AM
So what exactly besides holding the tube does that thing do? Does it cut the ends as well?
rino
April 13th, 2005, 10:43 PM
on the end of the shaft ther isshould be a hole saw the same size as the tube you are working with to notch 0deg to 90degand a hand drill on the other end.
SupraLuda
April 16th, 2005, 10:14 PM
ahh... found the website of the guy who made it: http://www.kcdawnpatrol.org/TubNotcher.htm
bm1
November 30th, 2005, 09:27 PM
The same thing as the Ole Joint Jigger. I bought the Joint Jigger for $149.00, then found some knock offs for $49.00. I got ripped.
voodoo_stepchild
January 26th, 2007, 08:34 PM
The same thing as the Ole Joint Jigger. I bought the Joint Jigger for $149.00, then found some knock offs for $49.00. I got ripped.

I bought the same ole joint jigger and it is much more precise than the knockoff's. I noticed the cheapo's to allow the holesaw to walk a little bit and it eggs your notch. Not that it matters as its a pretty good fit anyways, but I have carbide tipped holesaws and if it walks it knocks the carbide off and I am not real fond of silver soldering new carbide teeth on and having to reshape them.

Voodoo:cheers: