PDA

View Full Version : 1st BSR almost finished....

E&K racing
February 7th, 2008, 10:48 PM
This is a slideshow of my first BSR almost finished! Only thing left is painting the frame a gloss black. The man riding it is a teacher at the high school we go to. BSR is a product of 2 18 year old kids!! :hot:

http://s246.photobucket.com/albums/gg92/88rangerman/?action=view&current=barstoolgocart_0001.flv
Mike Bean
February 8th, 2008, 12:04 AM
Nice work!

Thank for the video! You did a nice job on it.

Mike Bean
E&K racing
February 8th, 2008, 12:50 PM
Thanks mike!
Heff
February 8th, 2008, 03:15 PM
Good job guys, looks good....Be careful. Heff
E&K racing
February 9th, 2008, 03:48 PM
Yea definately. The clutch got all gommed up and caught today so the barstool took of like crazy and ran into a tree. It screwed up a wheel, the whole spindle kit includin knuckles the pitman arm and the other spindle. Pretty much sucks but neither of us was hurt which is good! So were gonna switch to a torque-a-verter or a racing clutch this time. But there was a little forethought in the steering shaft and so the bottom where the pitman arms is welded on screws off so its not a horrible hard fix for that at least
Heff
February 10th, 2008, 04:33 PM
I`ve got about a $60 clutch on mine and I hate it. I`m going with a TAV 2. You`ll get good take off power and good top end. Heff
E&K racing
February 10th, 2008, 10:54 PM
Right now you basically have to push it but once it gets rollin if u throttle up it MOVES!!!! Wheelies would be nice! We got our clutch from northern tools. It was like 35 dollars.
E&K racing
February 10th, 2008, 11:02 PM
This is a good video!!! Shows the speed we have!!

http://s246.photobucket.com/albums/gg92/88rangerman/?action=view&current=BSR030.flv
ckoczara
February 14th, 2008, 01:22 PM
This is a good video!!! Shows the speed we have!!

http://s246.photobucket.com/albums/gg92/88rangerman/?action=view&current=BSR030.flv

That thing moves out preety well!! What size is the engine? Dose it have the gov. removed?

:wave:
E&K racing
February 15th, 2008, 01:58 AM
The engine is the famous honda clone from harbor freight and the governor is still on the motor! the speed you see i'm guessing is around 30-35mph i was pulling away from a car doing 25-30
ckoczara
February 15th, 2008, 07:43 AM
The engine is the famous honda clone from harbor freight and the governor is still on the motor! the speed you see i'm guessing is around 30-35mph i was pulling away from a car doing 25-30

That is the same engine I am using. I was toying with making some mods to it, but after seeing your's run, I think I will leave it alone for a while.

Great job!


:thumb:
E&K racing
February 18th, 2008, 01:43 PM
Yea, its pretty fast. We have another project in mind that'll be even faster though.
E&K racing
May 8th, 2008, 12:58 PM
hello guys its been a while scence i'ved had a chance to report back. we took our bsr out last night and got a final speed of 50-55 mph with a clutch. i'm trying to get a torq a verter so when i get it i'll have a faster speed, also i've got some more video and pics to post soon.

erik