Need a Measurement - Pro Street

[w3srl]

Hey guys,

I need a ballpark measurement from someone who has a Pro Street BSR that is completed. I'm down to assembling the steering/handlebar assembly, but if the BSR won't fit into the back of my Suburban I'm going to have to find a way to modify the handlebar setup.

Could I get a measurement from the floor to the top of the handlebars please?

[speeddemon0308]

why not remake the stering so its a 2 piece desing.. and have a bolt and nut holding it on?

on ours we used a stem off a bike.. so we can remove it.. and raise and lower it 4 inchs!!!

[Mike Bean]

The steering shaft is 36" (3 feet) add one more inch to the handle bar and then 3 inches for ground clearance.

So you going to be looking around 40" in height. Should have built the Classic Cruiser, the steering column is removeable...

Mike Bean

[w3srl]

Thanks for the help guys, I appreciate it.

I'm really leaning toward the bicycle-stem setup now, although I'm going to measure the Suburban first. It might just fit as-is!