Show Off Your BSR Photos on Barstool Racer Supply Site!

[Mike Bean]

We are going to be making a new page for the BarstoolRacerSupply.com (http://barstoolracersupply.com)site that will display photos and some comments from builders that have used our site to build thier BSR's.

If you would like to have your BSR displayed on the site, please send us your photos and a short comment on your BSR to support@barstoolracersupply.com (support@barstoolracersupply.com).

We are also thinking about rotating some of these photos on the actual home page where the 3 are currently displaying.

Thanks again for supporting BarstoolRacerSupply.com (http://barstoolracersupply.com). :thumb:

Mike Bean
:hot:

[jstrawse]

Hey I love your site, Here is a barstool racer I built from scratch ,motor mount, Axle, frame, steering shaft,everything but the Engine/Clutch, wheels/tires, brakes,and stool. I should have bought the frame, It would have been easier.

[Mike Bean]

Where is the photo?

Mike Bean

[ckoczara]

We are going to be making a new page for the BarstoolRacerSupply.com (http://barstoolracersupply.com)site that will display photos and some comments from builders that have used our site to build thier BSR's.

If you would like to have your BSR displayed on the site, please send us your photos and a short comment on your BSR to support@barstoolracersupply.com (support@barstoolracersupply.com).

We are also thinking about rotating some of these photos on the actual home page where the 3 are currently displaying.

Thanks again for supporting BarstoolRacerSupply.com (http://barstoolracersupply.com). :thumb:

Mike Bean
:hot:


Hey Mike;

I have to take pictures of my BSR with the air scoop. I had the BSR frame powder coated in "Wet Black" and painted the scoop to match. Wit the flames, and the front and rear spoilers polished and striped, it's preety bad ass. So I'm told. You guys can be the judges.

I am going to be out of town on vacation until Thursday the 17th. I will send you photos then. Do I still need to reduce the photo size if I use this address? Or do you have some place else I can send them to?

Chris :cheers:

[Mike Bean]

Hi Chris,

No need to reduce the photo size. I can take care of it here. Send the photos to support@barstoolracersupply.com

Thanks!

Mike Bean

[JChatt]

do these have to be followed by your plans to be put onto your site? mine i kind of took ideas from everything

JChatt

[Mike Bean]

No, not at all. We just want to show what people have built.

Thanks,

Mike Bean

[JChatt]

alright, here you go

http://i121.photobucket.com/albums/o216/greddy06/DSCN2602.jpg

JChatt

[c.schulz]

He's mine. Not complete but is anything ever??

Chris
http://img.photobucket.com/albums/v347/cschulz/IMG_3094Medium.jpg
http://img.photobucket.com/albums/v347/cschulz/IMG_3095Medium.jpg

[jstrawse]

nice, is that powder coat ,and are you going with hyd. brakes ???

[c.schulz]

nice, is that powder coat ,and are you going with hyd. brakes ???

Accually that is white primer and yes it has disc brakes. The color I was going to paint was orange a white primer helps the orange pop a little over gray or red primer.
Thanks for the interest.
Chris

[jstrawse]

I have been working on this Cooler Cruiser And I'm getting close . I havn't decided on a theme as of yet maybe Penn State if I can find a Nittnay Lion Suit to wearC:\Documents and Settings\John\My Documents\My Pictures\cooler cruiser

[Fudd]

I just showed the BSR at another indoor car show. I made plenty of flyers for Barstool Racer Supply They were gone in nothing flat. I turned down offers all weekend long. I even turned down $2000.00. People actually had thier checkbooks out thinking I was taking orders. Viva le BSR