PDA

View Full Version : would this bar stool fit

ryanbiggz
February 29th, 2008, 07:31 PM
i was just wondering if this bar stool would fit
http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2DP070&N=700+115&autoview=sku
wayfat
February 29th, 2008, 10:22 PM
you bet it would. I bought my bar stool and built the frame from there after getting the measurements. thats what everyone is using, unless the build their own. good luck on the build.
wayfat
ryanbiggz
March 5th, 2008, 05:43 PM
thanks for the info
Fudd
March 5th, 2008, 11:01 PM
MMMMM can anyony tell me all the measurements are please?
Steelwill
March 6th, 2008, 11:17 PM
I don't see why not I think all those style barstools have about the same demensions.
NutDriverRighty
November 29th, 2008, 08:14 PM
I need a shorter barstool. Mine is about 30" tall. My steering wheel is at seat height. I don't really want to add a longer steering shaft due to flex. Would like to have about 20" or so without having to cut and weld the one that I have now. Any ideas/suggestions?
shrek
July 15th, 2009, 10:29 AM
The Summit one says it "Swivels", is that a concern?
NutDriverRighty
July 15th, 2009, 11:08 AM
Acutally, I found a very talented welder locally who removed 6" from the height of the stool and did so where it's nearly undetectable.
In regard to a barstool swiveling, I would say yes, that it is a problem.

Scott
www.NutDriver.org
wayfat
July 15th, 2009, 11:09 PM
as far as the swivel part goes, i just leave the swivel part off, put the seat where i want it, and screw through the frame where the swivel was supposed to mount, and up into the seat. piece of cake.
wayfat
shrek
July 16th, 2009, 09:26 AM
as far as the swivel part goes, i just leave the swivel part off, put the seat where i want it, and screw through the frame where the swivel was supposed to mount, and up into the seat. piece of cake.
wayfat

Thanks, thats what I will do!