View Full Version : First Ride
ckoczara
March 12th, 2008, 01:09 PM
Ok;
I went for my first ride this afternoon. Holy S*!@!!!! I will be leaving the engine alone for a while. Much faster than I expected. I guess I should have mentioned that I couldn't get the brakes to bleed correctly. This most definetly added to the terror. I wouldn't recommend doing this.
So, how do you get the brakes to grab at the top of the lever stroke? I bleed the air from the lines individually, the brake feel got firmer, but still dose not have enough pressure to clamp down on the disc. What do I do to cure this problem?
Chris :dizzy:
Mike Bean
March 12th, 2008, 11:21 PM
Are you using the MCP hydraulic brake setup? If so, I recommend calling them because there is a trick to bleeding them that works great and you will have excellent stopping power.
I would post it here, but I forget the exact way to do it now.
Mike Bean
ckoczara
March 13th, 2008, 04:43 PM
Are you using the MCP hydraulic brake setup? If so, I recommend calling them because there is a trick to bleeding them that works great and you will have excellent stopping power.
I would post it here, but I forget the exact way to do it now.
Mike Bean
We have brakes now. The trick was the pad adjustment screws on the side of the calliper. :thumb:
Chris
c.schulz
March 18th, 2008, 01:34 PM
Way to go HOT ROD.......These things are a little scary sitting 3' in the air!
Chris
ckoczara
March 20th, 2008, 11:42 PM
Way to go HOT ROD.......These things are a little scary sitting 3' in the air!
Chris
Hey your still around!
A bad thing happened, I got used to the stock speed. So, I went and visited Russ at NR Racing. Long and short, Stage 2. This thing sounds mean thru the dual exhaust!! I sware this thing sounds like a Harley. I'm back to being frightened by it again though.
I am getting ready to start on #5. It has been a busy off season for me. My garage went from 2 race cars to a pile of Bar Stool Racers. With gas prices this high, I might be taking bar stools to the Woodward Cruise this year.....
Chris :cheers:
Steelwill
March 23rd, 2008, 08:20 AM
Hey your still around!
A bad thing happened, I got used to the stock speed. So, I went and visited Russ at NR Racing. Long and short, Stage 2. This thing sounds mean thru the dual exhaust!! I sware this thing sounds like a Harley. I'm back to being frightened by it again though.
I am getting ready to start on #5. It has been a busy off season for me. My garage went from 2 race cars to a pile of Bar Stool Racers. With gas prices this high, I might be taking bar stools to the Woodward Cruise this year.....
Chris :cheers:
If everything works out I may cruise mine at the downriver and the dream cruise.
ckoczara
March 26th, 2008, 09:43 PM
If everything works out I may cruise mine at the downriver and the dream cruise.
Are you a local Michigander??
Chris:wave:
c.schulz
March 26th, 2008, 11:17 PM
Chris you need to post up some pics of these BSR's that you are building!!!
Chris from Ortonville
ckoczara
March 27th, 2008, 12:54 AM
Chris you need to post up some pics of these BSR's that you are building!!!
Chris from Ortonville
I have been side tracked lately. I will need to post some new ones. Feel free to stop by when ever you feel like taking a look at them.
Chris
vBulletin v3.5.2, Copyright ©2000-2012, Jelsoft Enterprises Ltd.