Tie Rod Length?

[Chevyboy_0]

ANy one have any Ideas for Tie rod lengths? I'm getting ready to order them and have no Idea on what to order... I was thinking 13"

[BuddhaBomb]

If you are fabbing a custom ride, then that will be determined by your setup.. such as the length from the spindle to the pitman arm, minus jam nut and heim distance. I just ran some 3/8th ID tubing from one side to the other to get by until I can set up the steering.

[Chevyboy_0]

True I hadn't thought about that....

[OffroadRatFabricator]

If your not sure just order them longer to be safer then cut to length after you bsr is born and drill and tap for heims.

[tech9]

Remember to cut the side with the right hand thread,so that it will be easier to drill and tap,and you will still be able to adjust.