Custom BSR For Sale ( Very Nice)

[ckoczara]

I have one I would like to sell. It needs to be completed, but all of the dificult items are complete. It is set up for a TAV-2 unit, which will need to be purchased.


Mini Cooper Hyper Blue Base coat/Clear coat
3 inches longer than the plan call for
Hyd. braking system
Air Scoop (Needs to have glass finished)
6.5hp Clone engine. (Never started) also blue
Many polished aluminum parts.
Aluminum diamond plate
Dual exhaust already jet coated with polished mufflers
Front and rear spoilers. Front is polished, rear is still satin.
Prostreet wheelie bar with roller blade wheelsI will be taking a loss on this one, but here is what I am asking $1300.00 OBO. I am located in Michigan (810) 429-6446

Don't be scared to make me an offer.

[leroux]

850.00 you said dont be scared

[R Kroeger]

Why are you selling it? It's seems like the price is almost too low for the quality

[dropping_deuces81]

Sorry this ain't an offer, but that thing is absolutely superb. Very nice work.....I don't know if I could let something like that go.

[c.schulz]

Guys I have seen this piece in person and it is as nice and better than the pictures show. From the message I know he has another that is finished and this was built for a customer that backed out on him.
Guys I highly suggest if you have the means you should jump on this if not just for the part alone. What a deal!!!!!!!!!!!!!!


Chris

[racerdave]

What is a Tav-2 unit? Where in Mi are you? Thanks, RD

[c.schulz]

This is a Tav-2
http://www.bmikarts.com/shop/?keywords=Comet+Torque+Converter+%2335+%26+%2340%2F41+with+3%2F4%22+Bore&match_criteria=all&search=Search&cart=1693732

And he is in Goodrich MI just 25 miles south of Flint.

Chris

[racerdave]

Your link doesn't work, but I did find out. Same as what on some go carts.

[Moosey]

I'm very interested. Still for sale? John.319 2306013.


Mini Cooper Hyper Blue Base coat/Clear coat
3 inches longer than the plan call for
Hyd. braking system
Air Scoop (Needs to have glass finished)
6.5hp Clone engine. (Never started) also blue
Many polished aluminum parts.
Aluminum diamond plate
Dual exhaust already jet coated with polished mufflers
Front and rear spoilers. Front is polished, rear is still satin.
Prostreet wheelie bar with roller blade wheelsI will be taking a loss on this one, but here is what I am asking $1300.00 OBO. I am located in Michigan (810) 429-6446

Don't be scared to make me an offer.[/quote]

[ckoczara]

Hey John;

It is still for sale. It has been in storage for the winter.

Chris




I'm very interested. Still for sale? John.319 2306013.

Mini Cooper Hyper Blue Base coat/Clear coat
3 inches longer than the plan call for
Hyd. braking system
Air Scoop (Needs to have glass finished)
6.5hp Clone engine. (Never started) also blue
Many polished aluminum parts.
Aluminum diamond plate
Dual exhaust already jet coated with polished mufflers
Front and rear spoilers. Front is polished, rear is still satin.
Prostreet wheelie bar with roller blade wheelsI will be taking a loss on this one, but here is what I am asking $1300.00 OBO. I am located in Michigan (810) 429-6446

Don't be scared to make me an offer.[/quote]

[Bud Fisher]

How much work is left to finish? Would you take $1100.00. Let me know by the following: budfisher@frontiernet.net or 304-257-4907.
Budweiser.

[ckoczara]

How much work is left to finish? Would you take $1100.00. Let me know by the following: budfisher@frontiernet.net or 304-257-4907.
Budweiser.

Hey Bud;

I origialy had this racer listed for $2200.00 complete. In it's current state, I am afraid that $1300.00 is the bottom line. I am planning to pull my ad this week and finish it. Than I will relist it for the full price again. This racer is worth every penny I am asking for it. I have countless hours into it. As of Wed. of this week, the posting will be removed from the site.

[Bud Fisher]

How long will it take to finish this ride? Can a person of average mechanical skills finish the Scoop and wing work?

[ckoczara]

How long will it take to finish this ride? Can a person of average mechanical skills finish the Scoop and wing work?


I think so. There is no welding to be done. Typically that is what makes people shy away from these things. What needs to be done to it is;


Install the Torq-A-Verter
Bleed the brake system
Paint the wheelie bars
Install a gas line
Connect the throttle cable.
Adjust the jetting on the carb.
Adjust the idle speed.
Install the chain.
Polish the rear wing
Finish the air scoop.The air scoop is not required for the barstool racer to function at all. You could skip it all together if you choose to. The wings are done, the rear simply needs to be wet sanded and polished to a shine.

For the most part, I think anyone could handle putting the rest together, with the exception of the air scoop. I'll complete the whole thing including the painting of the air scoop for $1800.00

[ckoczara]

NO LONGER FOR SALE>>>>>>>>>>>>>>

[cybersnippy]

When the blue stool returns from final assembly, it is going to be hard for you to decide whether you want the black or the blue. That multi step paint looks eye popping with the blue. Especially now since the air scoop will very visible. The paint is that $300.00 a gallon stuff.

[troynugget13]

hey would you take 600 i am trying to find one thats not a bad price and if i can get it for 600 i thank thats ok