Build Off Update

[Woodchuckscustoms.com]

Check out the updated Entry Fee For the 2006 Barstool Racer Build Off!:cheers: At this price everyone can get in on all the fun!:blob_red:
http://www.woodchuckscustoms.com/Barstool%20build%20off%20page.htm

[Guy]

Nice update Woodchuck....
Maybe i'll get into this one with a model T look front axle... maybe put an old McCulloch half out the front of the stool.... hmm, 48" Long, guess I'd have room for an old style trunk in the back...

[Woodchuckscustoms.com]

sounds good cant wait to see it!:blue_blob:

[Woodchuckscustoms.com]

Hey all is there anyone from this forum getting in on this contest?:sleeping:

[Guy]

jeez, I just spent well over $350 in some parts for my 1st BSR (clutch, 2 hubs, sprocket&hub, tie rods, axle kit w'bearings
shipping ate up about $100
UPS is high here in Alaska.
I'm interested, I know a few guys that build race cars, or repair regular cars. Everytime I ask them for help, the tell me what to do, but are very unlikely to actually do the work unless I pay them. Suppose I have that deal... that's cool, right? and the deadline isn't 'til the 6th of summer.
lemme put it like this: We've never seen this "BSR in person in my state, maybe there are other's that haven't either.
As a contestant, am I limited to the knowledge I now possess (http://www.google.com/search?hl=en&safe=off&q=possess&spell=1) or can I draw from the cumulative knowledge of the racers in the great state of Alaska as long as I actually do work?
It may sound cocky, but I can't help thinking it'll come down to the wire, and I'll be discluded, on account of too much help.
Either that, or some state or reigion will bring in a ringer, lmao

Look, if it's a real deal, a can almost guarantee that Alaska can build one better than just about any other state in the country, but I want to be clear on some points...
1) does the engine need to be under the stool?
2) min height
3) the hole other stuff, like beer.

[Woodchuckscustoms.com]

If you enter and have some help just make sure your in there helping with the prosess, the motor can be anyware you want it to be. Not sure about your question about the min. height????

[moto1fast]

Helo, Sounds Great!! I will be entering it!! It will be a blast!!:blob_red:

[Woodchuckscustoms.com]

Helo, Sounds Great!! I will be entering it!! It will be a blast!!:blob_red:

Sound good moto! Get some of your buddies to join in on the fun!:cheers:

[Woodchuckscustoms.com]

Just wondering whats everyones feelings about the judging day for this build off ? Entries are to be in by end of July so what month would be good to do the drawing? Oct- Nov. Or Dec. 2006 :cheers: ???????

[Canadiankid]

Build off is a great idea. Were will we be able to view contestant entries. I would sign up but my first BSR is a mike clone. Mabey next year if you do it again. After I have a chance to brain storm and come up with a few of my own ideas.

[ROADFIXER1]

Where is the build off going to be held maybe I missed it but need a date and location to see if I can make the build off.....thanks

[Woodchuckscustoms.com]

Where is the build off going to be held maybe I missed it but need a date and location to see if I can make the build off.....thanks

The build off is an internet baced contest the judges are getting together to do the judgeing you will need to document your build for the judges. Check out this link
http://www.woodchuckscustoms.com/Barstool%20build%20off%20page.htm

Thanks:cheers:

[Woodchuckscustoms.com]

After talking with Mike about the build off we have extended the Entry Deadline to September 30th 2006. Good Luck to all that enter.:cheers:

[Canadiankid]

How many people signed up so far. I'll enter my next bar stool...I should have time since you extended the entry deadline.

[ROADFIXER1]

thanks for clearing that up ...internet build off makes life easy..just got two cage jobs this weekend ones a drag car and one street cruzer so my bar stool racer will have to wait awhile....

[Guy]

Sorry, I cannot compete. my length is too long by a few inches, and I'm getting professional help on the welding. I'm making all the cuts and tacks, but I'm leaving the finish welding to a body shop owner. In the long run, I'll have a stool that I know is safe, guaranteed against fall-apart.

[Woodchuckscustoms.com]

Sorry, I cannot compete. my length is too long by a few inches, and I'm getting professional help on the welding. I'm making all the cuts and tacks, but I'm leaving the finish welding to a body shop owner. In the long run, I'll have a stool that I know is safe, guaranteed against fall-apart.


That one looks good. The Build off dead line is'nt till end of sept. Build a model to enter in the contest!! Git-R-Done:cheers:

[Woodchuckscustoms.com]

We are starting to get some responce for the build off now We have even gotten responces from the UK and the land down under.:cheers:

[Woodchuckscustoms.com]

Hi all we were just wondering if there is anybody from this forum building for the B.S.R Build Off ? Feed back man give us some feed back:cheers:

[sniffles]

Hey Woodchuck,
I have two questions. First I am upgrading a 6.5hp engine up way past 8 horsepower. Second question is I am not 18. Can I enter my dad or somebody else?

[Woodchuckscustoms.com]

Hey Woodchuck,
I have two questions. First I am upgrading a 6.5hp engine up way past 8 horsepower. Second question is I am not 18. Can I enter my dad or somebody else?

need to be 18:cheers:

[Woodchuckscustoms.com]

New UPDATE on the build off. as of yet we have no entries.:sleeping:

Woodchucks Customs had a radio spot produced and joined the radio free wease show on the first day of summer to promote this event.Great Turn Out this might turn into a local event:cool_dude:
Check out the new Video:cheers:
http://www.woodchuckscustoms.com/Video%20free%20discounted%20parts%20and%20barstool%20racers.htm

[Woodchuckscustoms.com]

Hey all :wave: We were just wondering if there will be anybody entering the Build Off from this site?:cheers:

[Guy]

Well, I'm back!.... I maybe could shave a few inches to come under the rules, but unfortunately cannot/ weld it myself.
I can't believe there's noone that has entered this yet.
Way short of 50 entries needed...
All I can say is there's a few hundred people in Alaska that just seen their 1st ever BSR.
July 2nd I ran the 1/8 mile @37mph, so people are just looking into this here.
Personally, I'm glad I had my friend weld my frame, if I'd crashed on the dragstrip in front 4-500 people at the NHRA sanctioned dragstrip, it'd given us all a black eye, and BSRs would never be allowed on that track again.
There's still time... dang, just need 1 from every state, lol.

[Guy]

OK, I do seem to be the undisputed BSR champion of all Alaska, and may be in a position to get a local DJ to ride mine out at the www.afc.tv (http://www.afc.tv) fights he's the announcer for. I know he rode a mini-chopper out once, and could maybe put a plug in for the site, but i'd need to know if this is on or not....
Lemme ask you this woodchuck.... if 10 people sign up from Alaska, and that's about it, is it still do-able with a diff prize money?

[elvergon]

I think that sniffles should have a chance to enter too. Maybe his dad could register it for him and take him. I say this cause not so long before I was the only 16 year old kid in the welding classes, and lot´s of people tried to show the teacher I sucked, but I could weld better than them.

C´mon woodchuck, let his dad register it for him :D

[Woodchuckscustoms.com]

At this point in time 10 people from alaska would be cool we would have to alter the prizes but that's do-able.:thumb: And sniffles the rule will bend for you and your dad but you will need to do the work on it brother:cheers:

[Woodchuckscustoms.com]

Well, I'm back!.... I maybe could shave a few inches to come under the rules, but unfortunately cannot/ weld it myself.
I can't believe there's noone that has entered this yet.
Way short of 50 entries needed...
All I can say is there's a few hundred people in Alaska that just seen their 1st ever BSR.
July 2nd I ran the 1/8 mile @37mph, so people are just looking into this here.
Personally, I'm glad I had my friend weld my frame, if I'd crashed on the dragstrip in front 4-500 people at the NHRA sanctioned dragstrip, it'd given us all a black eye, and BSRs would never be allowed on that track again.
There's still time... dang, just need 1 from every state, lol.


Guy we could bend the langth rule and the welding it yourself but you will have had to finish it after the weld.
:thumb: Git-R-Done

[Woodchuckscustoms.com]

Ok everyone check out this link! We have revised the rules and prize money to accomidate more builders. One way or another it will happen, just remember "If you Build it They will come" Good luck to all!

http://www.woodchuckscustoms.com/Barstool%20build%20off%20page.htm

If we get more then 25 entries the Prize Money will increase, kinda like the Lottery, ya thats it the Lottery:cheers:

[Woodchuckscustoms.com]

Build Off Update
:thumb:
http://www.woodchuckscustoms.com/Bar...off%20page.htm

[tqm3]

Hey all is there anyone from this forum getting in on this contest?:sleeping:
I already finished mine before I knew of this contest. I have no video of the build....:cheers:

[Woodchuckscustoms.com]

bummer dude:dizzy:
build another one my brother:cheers:

[tqm3]

bummer dude:dizzy:
build another one my brother:cheers:
Maybe some day! IF I build another it will be a crew cab stool!:cheers: :lush:

[Woodchuckscustoms.com]

Enter next year my brother:cool_dude: