voodoo_stepchild
January 17th, 2006, 01:17 AM
I have 3 engines for sale,
1. an original raptor 3 nhra legal jr dragster with a float type carb and intake attatched. No exhaust and all stock internals. Started and ran only on our dyno for a baseline purpose only. It was ran on alky and flushed on gas. I guarantee this motor to be all stock internally and in excelent shape.
2. I have a linited mod dual bearing briggs i/c engine, stock stroke and stock bore. ARC 4.475 inch rod, wiseco stock bore size single ring piston, hortsman inserts, dyno cams 98-exp cam, wrc dual wound valve springs , stock exhaust valve and stock stainless intalke valve. Mild porting and extreme polishing on both intake and exhaust ports. stock raptor 3 head milled .090 with .030 copper head gasket and fireslot cut into it. Stock raptor 3 cast iron flywheel and stock raptor 3 coil. Tillotson hp 320 alky carb and dirt werx custom breather. Dyno'ed at 9300 max and 17.634 h.p at 5900 rpm with a pretty flat torque curve. Would really open up if someone wanted to take the time cut in larger valves. We have 5 pulls on the engine with alky and the motor was flushed and stored. I guarantee this motor to be running and in excellent shape.
3. Blockzilla 3x3 stroker motor. Lunati stroker crank, ARC 4.350 stroker rod and .230 oversize piston. dyno cams 98 exp welded lobe billet cam, Wrc dual wound springs, Clements billet head with fins( self machined), big valves and seats(sorry cant remember the sizes unless I pull the head and mic them but if I remember correctly it is a 1.439 intake and 1.375 exhaust). custom .015 copper head gasket, clements billet flywheel with fins, coil bracket and hot coil. Custom billet intake and bored 42 mm alky mikuni carb. No exhaust sorry it stays with us. 9650 peak rpm and 26.92 hp at 6100 with a nice flat torque curve. A great open motor only ran 11 pulls on the dyno and was flushed after running and stored.
I guarantee all 3 engines to be in the utmost top shape and your money back guaranteed if your not happy with them for any reason. I dont really want to sell them but I dont have a use for them anymore. 420.00 for the stocker, 750.00for the limited, and 1200.00 for the blockzilla. need more info feel free to email me at batwing2@msn.com
when in doubt lean it out
Voodoo
1. an original raptor 3 nhra legal jr dragster with a float type carb and intake attatched. No exhaust and all stock internals. Started and ran only on our dyno for a baseline purpose only. It was ran on alky and flushed on gas. I guarantee this motor to be all stock internally and in excelent shape.
2. I have a linited mod dual bearing briggs i/c engine, stock stroke and stock bore. ARC 4.475 inch rod, wiseco stock bore size single ring piston, hortsman inserts, dyno cams 98-exp cam, wrc dual wound valve springs , stock exhaust valve and stock stainless intalke valve. Mild porting and extreme polishing on both intake and exhaust ports. stock raptor 3 head milled .090 with .030 copper head gasket and fireslot cut into it. Stock raptor 3 cast iron flywheel and stock raptor 3 coil. Tillotson hp 320 alky carb and dirt werx custom breather. Dyno'ed at 9300 max and 17.634 h.p at 5900 rpm with a pretty flat torque curve. Would really open up if someone wanted to take the time cut in larger valves. We have 5 pulls on the engine with alky and the motor was flushed and stored. I guarantee this motor to be running and in excellent shape.
3. Blockzilla 3x3 stroker motor. Lunati stroker crank, ARC 4.350 stroker rod and .230 oversize piston. dyno cams 98 exp welded lobe billet cam, Wrc dual wound springs, Clements billet head with fins( self machined), big valves and seats(sorry cant remember the sizes unless I pull the head and mic them but if I remember correctly it is a 1.439 intake and 1.375 exhaust). custom .015 copper head gasket, clements billet flywheel with fins, coil bracket and hot coil. Custom billet intake and bored 42 mm alky mikuni carb. No exhaust sorry it stays with us. 9650 peak rpm and 26.92 hp at 6100 with a nice flat torque curve. A great open motor only ran 11 pulls on the dyno and was flushed after running and stored.
I guarantee all 3 engines to be in the utmost top shape and your money back guaranteed if your not happy with them for any reason. I dont really want to sell them but I dont have a use for them anymore. 420.00 for the stocker, 750.00for the limited, and 1200.00 for the blockzilla. need more info feel free to email me at batwing2@msn.com
when in doubt lean it out
Voodoo