wheelie bar

[Penland]

alright guys last step till im done. i need a wheelie bar and i need some
ideas just to spark something. please attach picture

thank you, penland:blue_blob:

[Frank McGrath]

I had two casters with threaded studs on them. I cut apart the caster keeping the wheel and bracket. The stud and top swivel plate were excess. I then welded to brackets to the rear crossmember. I put a rod through the axle holes to line up the caster brackets before welding. The axles must be parallel to the crossmember. If not the stool frame will tilt over when doing a wheelie.

[c.schulz]

http://img.photobucket.com/albums/v347/cschulz/July11-09001Medium.jpg
http://img.photobucket.com/albums/v347/cschulz/July11-09003Medium.jpg
http://img.photobucket.com/albums/v347/cschulz/June21-09014Medium.jpg

[c.schulz]

http://img.photobucket.com/albums/v347/cschulz/spring200920042.jpg
http://img.photobucket.com/albums/v347/cschulz/Pimp20My20Stool20015.jpg
http://img.photobucket.com/albums/v347/cschulz/BSRWB.jpg
http://img.photobucket.com/albums/v347/cschulz/ae2b_1.jpg

[Penland]

thank ya'll very much i hope this thread can help other ppl