Start BSR construction

[Chewbacca]

Briggs 135200 5Cv motor

Chewbacca.

[Chewbacca]

Chewbacca.

[Chewbacca]

Chewbacca.

[Chewbacca]

Chewbacca.

[Chewbacca]

Chewbacca.

[Chewbacca]

Motor spec.

Chewbacca.

[Mike Bean]

Chewy,

I would like to suggest a recover for the seat on the stool. Your ass is going to be sore. :D

[Chewbacca]

Yes ! of course !

:D

Chewbacca.

[SupraLuda]

Nice dude... is that a 30mm or 40mm axle?

[Chewbacca]

40 mm axle (1.5748 inches diameter) with SKF bearing ref : BBY-0036

Chewbacca.

[Chewbacca]

I currently do not know if I will use square tube or round tube for the frame ???

Chewbacca.

[Mike Bean]

Chewy,

I don't know how good you are at welding and fab, but I would recommend square tubing if you have not worked much with round.

The square tubing still looks nice, round is going to be a pain to cut, notch and bend unless you are good at it.

Just my .02 cents.

mbean

[SupraLuda]

Chewbacca wrote: 40 mm axle (1.5748 inches diameter) with SKF bearing ref : BBY-0036

Chewbacca.



lolz... I know what 40mm is bro. ;) Very similar to mine. Must be nice to have only metric around. I'm running gold hardware too (on verticle cassette - not round and a 4 piston Hassie caliper, only on a 30mm axle thou.

[Chewbacca]

... processing ...

Chewbacca.

[Chewbacca]

Chewbacca.

[Chewbacca]

Chewbacca.

[Chewbacca]

;)

Chewbacca.

[monkey-1]

Chewy,

Did you make those rear bearing brackets or buy them?

[Chewbacca]

Hello,

I bought them here : http://ivd-kart.de/ooo/catalog/index.php/cPath/127

:cool:

Chewbacca.

[Chewbacca]

I just made the support of bearing housing to weld to the frame. ( in steel of 5 mm thickness )

Chewbacca.

[scogne]

chewy,

your bartsool is very good even ifit is just the beginning. Look at mine, isn't it very good too ?

scogne

[Chewbacca]

:D:P;)hahahahahahahaha !

Your ToiletRacer is quite simply splendid !!!

I want the same !

Hahaha !

Chewbacca.

[scogne]

thx chewy,

i need somebody to hold toilet paper, a voluntary ?

[Chewbacca]

Héhé, yes, if you want, i can...

:P



Chewy.

[scogne]

eh guy's,

it's just for fun, we love barstool, live the barstool !!

scogne

[FatDog]

scogne,

i believe it is 'you need a "volunteer"' not a "voluntary"

but quite amusing still the same. Hope it rides well and you don't take a dump on it.

And since my command of French is limited,

what is 'forum clan des fiottes' all about ?



Now back to the 'motorisé de toilette barstool',

since fine gentlemen can toil often for seemingly thousands of hours to perfect the optimum BSR, you have perhaps invented the soulagement d'ouvriers. Long live the working man.!!

[scogne]

hi fatdog,

the clan des fiottes is a team of gamers on internet, the game is Call of Duty.

scogne

[Chewbacca]

I will not send any more pictures and informations !

These documents are for do-it-yourself... Not tomake money !

View: http://barflyracers.com/forum/view_topic.php?id=79&forum_id=10

Chewbacca.

[Chewbacca]

Chewy's Stool Racer

[Chewbacca]

Chewy Stool Racer

[Chewbacca]

ChewyStoolRacer

[Chewbacca]

Chewy Stool Racer :)

[Chewbacca]

I will cut 10 inches has the rear axis (-25 cm)

Chwy Stool Racer

[Chewbacca]

Chewy Stool Racer

Rear axis modified picture for test...

[motorman100]

i want that engine

[stool-sample]

With the money spent on the axle assembly, Id buy a better looking stool. Your doing a great job so far, I would hate to see you put a used stool on it! Nice job. JMO Glenn

[Mike Bean]

I was looking over the frame and I was wondering how wide it is?

-mbean

[Chewbacca]

I will buy a new stool.
Thx Glenn

[Chewbacca]

Frame width : 30cm

[stool-sample]

Man Chew dont do it on my account! lol I think its gonna look pretty sweet with that rear axle set-up you have going!Keep us all posted! Glenn

[Chewbacca]

No no, the stool purchase envisaged since the beginning...

ChewyStoolRacer.

[Chewbacca]

ChewyStoolRacer.

[elvergon]

all that shinny things look very sweet. Keep us informed :D we would like to see the product and some vids too :D

[dtb69]

looks great keep up the good work,

[Chewbacca]

Chewy's come back...

[Woodchuckscustoms.com]

Hey Chewwy Looks good I bet it would look better ripping down the road.:cool_dude:

[Mike Bean]

Welcome back Chewy!

It's almost been a year...

Your BSR is looking good. I look forward to the finished photos..

Mike

[Chewbacca]

my exhaust in progress

[Chewbacca]

exhaust...

[Redrooster]

That's going to be one sweet ride when your done with it... can't wait to see it finished...

[elvergon]

What are you missing now?

We are impatient.

It looks cool.

What tube did you used?

Waiting to see it =) good job

[dtb69]

welcome back chewy, looks great, nice work
dtb

[Chewbacca]

The tube used for exhaust is 22 milimeter metric round tube.

Chewy.

[freak]

OOHHHH so close bro. Looks REALLY nice man. CAn't wait to see more progress.

[Chewbacca]

rear axle mounted

[Chewbacca]

rear axle view

[Chewbacca]

Test for position of front spindles

[Chewbacca]

more pics of frame with complete rear axle mounted.

Chewy.

[Chewbacca]

and picture again

Chewbacca.

[Chewbacca]

Chewbacca.

[Chewbacca]

ChewyStoolRacer.

[Chewbacca]

ChewyStoolRacer du boul.

[scogne]

very very good job chewy !!!

ras of ass

ehehhe
Scogne

[elvergon]

Nice Job chewy.

Gotta put the engine now =) and make some shots ;)

[dtb69]

chewy your sprocket looks a little close to the ground, hope you have clearance with chain when attached, nice work chewy, dtb,,,,,,,,

[Chewbacca]

Thank your for your reply !

Chewy.

[Chewbacca]

The steering in detail.

Chewy.

[Chewbacca]

Sproket to ground : more than 2"

Chewy.

[Voodoo Barstool Racers]

Hey! chewy,what size tube did you use?

[elvergon]

Good job, When do you think you´ll have it finished?

[Chewbacca]

frame : square tube 30mm x 30mm.
steering tube : round 25mm -> 1".

i think i finish it in 1 or 2 weeks.

Chewy.

[elvergon]

But what´s the square tubing wall thickness?

[Voodoo Barstool Racers]

hey! chewy,where did you get your sprocket,hubs from

[Chewbacca]

frame tube : 30mm x 30mm x 1.5mm


June 23rd, 2005, 03:10 PM
Chewbacca
Master Fabricator Join Date: Jun 2005
Posts: 109

--------------------------------------------------------------------------

Hello,

I bought them here : http://ivd-kart.de/ooo/catalog/index.php/cPath/127

Chewbacca.

[elvergon]

Do you think that square tubing thickness will hold up?

I started building one out of the same tubing thickness but when I saw the settings at which I burn through with the welder I got very scared.

Hope it´s good enough

[Chewbacca]

I use a Argon/CO2 (MIG, métal inert gas) welding machine.
With this, no problem for assemble tube 1.5mm thickness.
1.5mm for frame -> no problem of solidity !
My welder is a 150 Amps machine, and i weld in position 6/10.

Chewy.

[elvergon]

Well, I kno it can be Migged, tigged, sticked or oxi-acetilened

Thing is, it may be on the weak side, but it seems you got the knowledge to carry on it safely. Just take care, and keep pics coming =)

[Chewbacca]

Hi all !

Here my new front spindles. I wait shipping for my front hubs, track rod end, track rod and after... ... finished !

Chewy.

[Voodoo Barstool Racers]

did you get your spindles and same place you got your sprocket and hubs?:thumb:

[elvergon]

You could start the painting now ;)

What color are you putting on it? or are you leaving it polished?

[Chewbacca]

No, it's not a brand new spindles, it's a used spindles in good condition, found on ebay.
I dont know what color i put on my BSR ?
Maybe yellow,green or orange color... or black...

Chewy.

[dtb69]

chewy, i like your steering set up ,like the way you are useing bearings,good idea.keep up good work ,dtb...

[Chewbacca]

THX dtb69 !

Chewy.

[Chewbacca]

Hello all,

Here my new welding machine !

Chewbacca.

[Chewbacca]

This is a SAFMIG280BL - SAF Air-Liquide.

http://www.saf-airliquide.com/fr/prod_mater/fiches/notvent/materiel_manuel/mig_mag/1011_8.pdf

Chewbacca.

[Turbo_Stoolie]

Very nice, you just bought a bigger MIG? Looks like a good machine.

[Chewbacca]

Hi,

Yes, i have a bigger MIG.

Chewy.

[Chewbacca]

Héhéhé...

Chewbacca.

[Redrooster]

Hey Chewy... Looks good I like it....

[Chewbacca]

Thank you Redrooster.

Chewy.

[Snakester]

Hey Chewy, Your racer looks great!!! I like the wide stance....What kind of tires are you running ? I have a set that looks like them , now I think I may use them on a future project...Snakester:cheers:

[Chewbacca]

My tires : dunlop KT10 in 5".
My rims: front -> 125 mm; rear -> 180 mm

Chewbacca.

[elvergon]

What are you missing to see some vids? ;)

[Chewbacca]

Hello all !

Here, my front parts.

Chewy.

[Chewbacca]

I just wait for a rear caliper... and paint.

Chewy.

[kkuenemann]

VERY COOL!:thumb:

WHAT COLOR ARE YOU PLANNING, SOMETHING TO GO WITH THE GOLD ANODIZE ON THE ALUMINUM PARTS?

:cool_dude:

[Chewbacca]

aaarrrrr... that's a good question... at this time, i don't know...

Chewy.

[Redrooster]

Great job Chewy.... Looks awesome...

[Chewbacca]

Thanks all for your great reply !

Chewy.

[elvergon]

Great job, have you tested it yet?

[Chewbacca]

Hello all !

Today, my first run with my ChewyStoolRacer.
Here, one vidéo, i have no brake a this time.

http://www.myspace.com/chewbacca38

Chewy.

[Turbo_Stoolie]

Looks good !

[moto1fast]

Cool!! Looking good!! Need to get some brakes on that though or bigger shoes!! LOL:rofl: Maybe even a kill switch until you do get brakes!! You like to have wiped out the back of that car!!!

[Snakester]

Hey Chewy, That thing sounds like my Harley. Brakes and a kill switch are a must!!! :lush:

[Mike Bean]

Cool!! Looking good!! Need to get some brakes on that though or bigger shoes!! LOL:rofl: Maybe even a kill switch until you do get brakes!! You like to have wiped out the back of that car!!!

I think is it funny how the most important part of the build (brakes) are always the last to go one. I did the same thing myself... :laughing:

Mike Bean

[Mike Bean]

Hello all !

Today, my first run with my ChewyStoolRacer.
Here, one vidéo, i have no brake a this time.

http://www.myspace.com/chewbacca38

Chewy.

Hey Chewy,

I was not able to see any video. What do I click on when I get to the page the link is for?

Thanks.

[Chewbacca]

That is the good link to see vidéo directly.

http://vids.myspace.com/index.cfm?fuseaction=vids.showvids&friendID=123478849&n=123478849&MyToken=5e7c7137-1d51-4f0e-865a-a8ff8bb30b21

or if you want you can clic on "video" below chewbacca picture here:

http://www.myspace.com/chewbacca38

Chewy.

[Redrooster]

Hi Chewy... the bsr looks and sounds great... man get some brakes on that thing before you hurt yourself...

[Mike Bean]

I was able to see the videos, but no sound here. Might be my computer,,,

Thanks for the link!

[Chewbacca]

Hello,

More vidéos on :

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=1466246446

Chewy.

[Snakester]

Hey Chewy, Great Videos....really cool stuff!! Have you got the brakes working yet? Looks like you have some awsome roads to enjoy your ride on! Snakester:cheers:

[Chewbacca]

Hi !

i have just received my brake system !

Chewy.

[elvergon]

Man thats from an sport bike right?

You´ll fly over the BSR if you hit the brakes lol

[Chewbacca]

Hello,

Yes it's possible !!! Hahahahaha !

Chewy.

[Chewbacca]

Hello all,

All the pictures of my BSR construction here :

http://laplace.yoann.free.fr/

in "photos" catégory.

Chewy.

[moto1fast]

Nice Job Chewy!! What Color are you going to paint it? Did a real nice job on pics also on your constuction site! Lots of pics thats what we like!!:thumb:

[Chewbacca]

Thank you Moto1fast !!!

Maybe i would to paint it in yellow and black. Tomorrow i work on brake system... and after go to paint !

Chewy

[moto1fast]

Yellow and Black will look great on it!! Cant what to see it!!

[Chewbacca]

Here my braking system install in progress.

all pictures in "photos" category:

http://laplace.yoann.free.fr/

Chewy.

[moto1fast]

Looks great Chewy!! How are you going to activate them? With a cable or rod?:thumb:

[Chewbacca]

Hello,

I activate my hydraulic brake system by a cable.
I have finish my brake system today !

All pictures in "photos" catégory here :

http://laplace.yoann.free.fr/

Chewy.

[Snakester]

Hey Chewy, The brakes look great...I bet they work as good as they look! Makes riding a lot more fun when you can stop. All you need now is Paint?
Will be looking for finished pic's!!! Snakester:cheers:

[moto1fast]

Now that is what I call a brake system! Be careful at full throttle it will put you in a front summer salt! LOL:laughing: Great Job Chewy!! Cant wait to see it painted! I love your web site also, great detail of your projects! Are you in France?:thumb:

[Chewbacca]

Thank you for your reply !
Yes i live in france, in the french alpes mountain.

Now make a front and rear bumper, maybe left and right bumper too and paint !

I post pictures when i have progressed...

Chewy.

[Redrooster]

Great job Chewy... your bsr looks very nice and well built... awesome pictures... can't wait to see it finished and all painted...

[QuadRacer99]

looks sweet chewy,

just wondering how much the bsr costed you from start to finish? i am thinking of building my own and i would want it to look something like yours.

QuadRacer99

[Chewbacca]

End of my BSR !

[Chewbacca]

another pic.

[Chewbacca]

6 pictures

:)

Chewy.

[lyinlow]

looks awesome... nice work

[Garman351]

Yes ! of course !

:D

Chewbacca.

I think your stool seat looks like shit!
If you are manufacturing a Bar Stool
racer at least buy a nice seat for it
instead of that odd ball looking thing.

Garman351

[lyinlow]

what are you referring to?? his stool seat looks fine to me?

[Garman351]

what are you referring to?? his stool seat looks fine to me?

If that stool is the one pictured along with several photos of the Briggs motor that has square legs instead of round legs like a barstool should I
stand firm on what I said!

If the picture of a completed stool with bigger tires on it is your stool I than say I was wrong, and it looks good!

garman351

[Chewbacca]

Pics of brake :)

[Chewbacca]

Pics of brake 2 :)