Something a Little Different!! LOL

[moto1fast]

Ok here is the frame work for my Barrel Racer! I decided to make this a convertible BSR it will convert from a Off Road BSR to the Barrel Racer BSR. I am not going to use the plastic barrel but a steel one! Only had the plastic one available for pic. Will get a steel one today and start fabbing it to the frame. It will have a mounting system that fits into the regular barstool frame mounts except one more set at rear of frame. I am using 4 wheeler tires and wheels to get ground clearance for chain and sprocket, 6" of clearance. The frame is 10" ground clearance. Wil also work on front end today and post pics Tomorrow! Mike thoughs plans are great and had the frame done in about 2 hrs. from cut to finish! Thanks!! Will modify front end of course! See what you think!!:smash:

[elvergon]

Hey bro, that looks very nice.....what are you powering it with?

Keep up on the progress! we like lots of pics :D

[Nitefall]

That Is Going To Be "sweet!".
What Is Going To Really Set It Off Will Be The Paint Work To Setup The Theme.

Could Just Be A White Color W/ Block Leters "beer"
Or Something Really Fancy Like A Sideways "foster Beer Can!"
Keep Up The Good Work.
And If You Had A Tapper And A Pony Keg That Would Be Off The Hook!!!

Nitefall

[Aaron871]

What size tires are those? What do they measure each way?

[moto1fast]

These are 20 X 8 X 8. They came off a yamaha 125 breeze four wheeler. I have several different sizes to choose from put will try these first!:wave:

[moto1fast]

The power plant will be a 6.5 honda clone like my dual wheel BSR. I am designing this for Low end not speed. Will be going with a Hortsman Clutch set up. I have 30 different size rear sprockets to choose from and will try a 72 tooth first! When I am running the barrel as my body the engine will be inside of the barrel. The Middle of the barrel on the bottom will be cut out and the barrel will set over everything except Steering. This will give the engine enough air not to overheat as well. The Handle bars will have a Quik disconnect on it to change them out from a set of Texas Long Horns I am Going to make into Handle bars! LOL:rofl: to the Regular T Bar Handle bars! Should be a Wild Ride LOL. The exhaust will be of course under the Tail I will put on it!! LOL:laughing: Sounds like a Bunch of Bull!!!:rofl: I will be working on it and post more picks tomorrow!:thumb:

[elvergon]

With that tires you might not need the 72 teeth.... Wheel size is giving you a very nice low end if you use a standard clutch....


Well I´m sure you know lots of this....

Ah c´mon moto a 6.5? Well, its not for you, so that´s not a biggie ;)

[moto1fast]

I got the front end, rear axle installed and Steering bracket put on. I have kart tires on it right now but will be putting 20" Tall tires on it. I am building the hubs to fit axles for them. Working on a front bumber for it. The barrel I will get tomorrow and build the brackets and mount it on the frame! Will post more pics tomorrow of it! Here is what it looks like now!! Let me know what you think so far!:wave:

[elvergon]

I´d say the rear end is soo wide....maybe the 20´s Would fix that, but that just IMO...

How are you planning to do the hubs? there´s a million style!

Keep posting! i´m liking it!

[Woodchuckscustoms.com]

Hey Moto ...what size motor are you going to use to power this beast?:cheers:

[moto1fast]

I am going to use a 6.5 Honda clone on it! The next one gets a Honda 110 engine in it and will have front and rear suspension.:thumb:

[scuffedup]

Moto

What part of Texas are you in? I need to see some of these projects, they sound pretty cool!!!

[moto1fast]

Hello, I live in East Texas, Close to Nacogdoches. well about 60 miles West of there. I live out in the Woods away from any big City! lol:laughing: I have my shop built in a old Chicken House! I have a stocked 2 1/2 Acre pond with Catfish, Bass and blue gill perch also if you like to fish. I live on a 25 acre Farm with lots of places to ride off road but no Paved roads very close. I take my toys to town to have fun!!:wave:

[scuffedup]

Yep I guess thats kinda up yonder aways. I will be flying to Houston Friday, then driving a motorhome back to Georgia. Heck of a long ways to go get a motorhome!!!!!

Actually I will be going to Hempstead. It would be cool to see your projects.

Greg

[moto1fast]

I have made trips like that!! I have bought several things off ebay I had to make a long trip to get! My Motorcycle was one of them I had to go to Ohio to get it. If you will PM me (Private Message)I will give you my phone # and when you get close to Nacogdoches give me a call and I can give you dirrections to here if you have time to stop by you are welcome to!

[moto1fast]

Well here is the latest pics of what I have gotten done on my Convertable off road/ Barrel Racer! What ya think??

[moto1fast]

#2 Pic front view

[moto1fast]

# 3 Pic Rear View

[Aaron871]

I love it, it may need some flames....

[moto1fast]

I thought of that earlier today! I just got a New Air Brush and will try my hand at that. I have the hubs done to but the rear tires on tomorrow. I will also work on the front adapter plates for front hubs to bolt the front wheels and tires on! Have not decided on how to build the front bumper yet! Maybe one that looks like a train cattle catcher! LOL

[Snakester]

Hey Moto, I saw a real nice Western Saddle at a yard sale the other day , it would look great on your Racer!!!:cheers: Snakester

[moto1fast]

Cool, How much was it? I was thinking about one! Do they still have it? Let me know. That would set it off! LOL

[Snakester]

Yo Moto, I will go by there tomorrow and see if he still has the saddle. I buy a lot of stuff from him, he has the yard sale about 2 times a month , but I stop in just about any time. I think he wanted $125.00 for it , but he will make me a good deal. He always calls me if he gets anything with a motor on it ( tillers/lawn mowers/leaf blowers). I will purchase it if it is still there and I will donate it to your project...I will let you know! Snakester:lush: :lush: :lush:

[moto1fast]

Cool, Man donate it!!! By the way I am looking at a turbo charged P-51 Mustang engine out of a plane Can you buy it also and donate it to me? LOLOLOLO. Let me know what you pay for it and will pay for it!!! The saddle that is!! LOL

[monkey-1]

I will be honest with you, when you started talking about this project i was a little skeptical. But after seeing what you have come up with I am very impressed. Very cool ride man!! You MUST post some vids of that thing in action.

[moto1fast]

I know what you mean Monkey! I was a bit skeptical also of myself. I thought I had lost my mind. Even considered seeing a psychologist! LOL:laughing: As I was building it my Grandkids which me and my wife are rasing came into the shop the otherday just as I put the barrel on it and went crazy over it. They both want one now! LOL I have not shown any of my work on it to the City council man yet! I think it will be a hit at the rodeo! and then the barrel comes off and a barstool will fit right on! I might even make a few more bodies to fit on it??? I could put a trash can on it and call it trashy stool, A mechanics tool box and call it tool stool! LOL Now I know I have lost my mind! LOL:dizzy: I know put a Port-A-Cool on it and call it a ____________________ You name it!! LOL:laughing:

[elvergon]

Hey man I was never skeptikal... ;)

After seeing that badass tractor...nothing´s impossible for you bro ;) you definitivaly got the skills...

Waiting to see more...that racer is awesome!

[Snakester]

Hey Moto , I talked to my yard sale buddy today....He has already sold the saddle, but said he may have another one pretty soon...I will let you know. As for that P51 Mustang engine have you already got another project for that or maybe thinking of putting that in your Tractor? Snakester:me:

[Aaron871]

Hey Moto, we need some new progress pic's....

:blob_red: :blob_red: :blob_red: :blob_red:

[moto1fast]

Been busy with Honey does! Half to keep moma Happy. LOL I got my brakes on today and the throtle run. Will post some pics tomorrow!! Almost done except engine not here yet and will wait on it before welding motor mount plate in position! Also will be figuring out paint scheme for barrel! Any sugestions on how I should paint it? Like to get some ideas pertaining to a rodeo theme?

[Aaron871]

Well?......

[moto1fast]

Hello, Sorry for the delay in progress. This is a very busy time of the year it seems. I build and sell pedal tractor pulling sleds and Disk plows. I have been busy building and selling them for Christmas presents on ebay and locally. Here is some pics of them! I have sold about 30 sleds and 10 plows in the last month and it has kept me tied up. I will get back at my BSR's real soon. The rush is almost over thank God!!:smash:

[Woodchuckscustoms.com]

Hey Moto I like that puller sled! Is that a working model? I was thinking about making a BSR Puller to cart my lazy azz around the fair grounds next year.It would be cool to have a down sized puller sled for intermition entertainment:cool_dude:

[moto1fast]

Hello, Yes it is a working model for the pedal tractors! I have built a few for fourwheeler pulls and lawn mowers. I can build you one for a BSR for around 250.00 ready to go!!:thumb:

[Aaron871]

That is some nice clean work. I see why you have so many orders.
You definetly have some fab skills....

[moto1fast]

Thanks Aaron and Woodchuck!! I like to play around with metal and see what I can come up with!! I have a dream of building the first ever on and off road lake ready, All purpose Craft of some type!! Just trying to figure out how to convert a Wet bike, dirt bike, Motorcycle, lawn mower, BSR, Car, Truck, Airplane, helicopter, bicycle, wagon, into one operating bad ass thing of a jig!! LOL:rofl: :rofl:

[elvergon]

lol
Amazing Job moto!

Just don´t forget us...Wee neeed to see that kicker ;)