I have noticed a trend in the building of these

[Aaron871]

How many of you are shortening the stool?

Is that "legal"?

How short?

[moto1fast]

Legal??? Anything goes with these!! Some people will get all hot under the collar about this and some will say hey your the creator of your own ride! To me anything goes except if you mount a house on it you have to call it a house trailer or motorhome! LOL:laughing: I can here the cop now " Sir the reason I pulled you over is that you are riding a illegal Barstool Racer, Your legs have been shortened to much and is not legal for you to operate"!!LOLOL:laughing: Or I can here people say did you see that fake BSR that dude has! "Aint that a dissgrace". I think Not! If we all had to build one the same to be a barstool Racer, none of use would have one because each one is different! Some build their one legs of the barstool and is cool with me and some will only build using a original barstool out of a working business and that is also cool! Honestly we all have our opinions on this and we should! I myself look at it this way, If you build it and you like it and it puts a smile on your face and others it was not built wrong. There are many different barstools on the market today. Some have backs on them, some have a single post on them, some have 2 posts on them, and so on and so on! But they are still called BARSTOOLS!! I have never seen anyone take a tape measure when they are looking at your ride and say HEY DUDE!! THIS AINT LEGAL!!! Your 2 DAM Inchs SHORT or 2 dam inchs TALL! They will look at it and say COOL MAN!! Where can I get one!! If EVERYTHING" had to be a certain length to be a original then alot of men would be to short or to long be called a man!!!LOL:rofl: Hey!! It is Not the size that matters!! LOL:rofl:

[Snakester]

I just received a 24" Harley-Davidson Stool to use on another Racer.I can't wait to build it because I know w/a lower center of Gravity it is going to be really fun to ride. The best part of these things is to make it your own!!!Snakester:cool_dude:

[scooterpimp]

Yo! Ive Been To Many A Bars Over The Years & Seen Tall , Short , 3 legged, Metal , Wood Barstools Etc. The Important Part Is Not To Fall Off One When Your 1/2 Shot In The Ass. (Words To Live By):cheers:

[wayfat]

hey all,
I am not sure what you mean by "legal", but before I built mine, I was looking at the dimensions set up by NOBRA (natl. assoc. of bar stool racers), and I thought, screw that! I will never have mine in some "sanctioned" event, so I'll build it my way. I haven't seen any other ones where I live, so no one has anything to compare it to.
Now, if you mean "legal" in that some people don't use "real" barstools, or alter them in some way, I say to each his own. I prefer an actual barstool, but that's just me. I lowered mine, too. and it's not just because I'm vertically challenged, I just think it looks cooler. again, thats just me.
what I really like is some half drunk moron coming up and saying "you should put a snowmobile engine on that thing". probably never even used a welder before. Some time I'm gonna say when you build one, you can put whatever the hell you want on it, genius.
I say, just keep tossin the beers back, and welding stuff together.
Wayfat

[LWPSCORPION]

Ok I Think I Have It....

[moto1fast]

Looks Great!! Like the way you made and mounted the fuel cell! Have you decided what engine your going with? What color or colors you going to paint it? Keep up the Great work and now that you know how to post pics, Post lots of them!!:thumb: :thumb:

[LWPSCORPION]

I Am Going To Use A Grant 10" Wheel And Rack And Pinion,i Modified The Small Armes That The Tie Rods Connect To,i Heated Them Cherry Red And Bent Them To The Center,that Way The Inside Tire Cuts A Shorter Radious,i Might Go Ahead And Mount The Honda Clone 6.5 Hp,with A Comet V Drive Setup.and The Color Is The Brightest Red I Can Find,i Think I Have Some Viper Red Left Over From My Sunbeam Tiger Clone...i Need A Wiring Diagram For The 110 Honda Clone,it Is A Replacement For ?? And The Wire Plugs Are Set Up To Plug And Play, If You Have The Other End...i Will Be Gone From Dec 10 To Dec 17 Going On A Cruise...down Mexico...way, I Want To Buy A Rolex Clone...cheap $$ How Do You Post The Nos Fello On Your Title ? I Have A Small Bottle That Came Out Of The Keg,could Use It As A Clone Nos Bottle...and Fake It On The Bs Got A Sticker About 2 X 2 ? I Am Collecting Stufffff For A Radio Flyer Next...i Like The One With A Arms Etc...,i Have Burris Dirt Tires 12 X 9 X 6 , And Van-k 9 X 6 Wheels,for The Back.would Like 10" ??wheels Wayne

[Aaron871]

what I really like is some half drunk moron coming up and saying "you should put a snowmobile engine on that thing". probably never even used a welder before. Some time I'm gonna say when you build one, you can put whatever the hell you want on it, genius.




x2

I've built some wild and crazy stuff, and it dosen't matter how original you get with it. All the tire kickers in the peanut gallery that have never built anything will always criticize, and say "ya shoulda done this and that instead".....

I always say "that's a great idea! ..... you should do that whaen you build yours"..... they always shut up after that...

:cheers:

[Lumpy]

First post, here goes
where did the rack and pinion come from, I can't imagine they are cheap.
what a trick piece.....cool
Lumpy

[Lumpy]

that rack and pinion looks really trick, where are they from? I'm just getting started collecting stuff and I sure like the look of it, any downsides?

[Lumpy]

Ok 3rd try
That rack and pinion looks really trick. Where are they from? Any secrets to setting them up or just weld on a tab and bolt it on?

[garleness]

your stool is looking great i like the keg . im trying to find one myself but im having a hard time. keep up the great work

[lilBSRgrom]

there is a beer that sells small kegs of beer with a hndle and everything on it.

[Thunderbolt51]

Lumpy,that's a Jr.Dragster item, I've seen them go between $80-235 depending on vendor and complexity/quality. Check eBay.com too...

http://motivationaltubing.com/

http://secure.dnihost.net/mtcatalog/merchant.mvc?Screen=PROD&Store_Code=MC&Product_Code=300563&Category_Code=SSP

http://secure.dnihost.net/mtcatalog/merchant.mvc?Screen=PROD&Store_Code=MC&Product_Code=301808&Category_Code=SSP

[p-bass]

What I found, I guess if your going to run santioned races, NOBRA says 28" min. from ground to top of seat. If your just a beer drinker with a welder and some parts, (like many of us). Build what you want. Have fun and have another beer brother.:cheers:

[dwright]

I Am Going To Use A Grant 10" Wheel And Rack And Pinion,i Modified The Small Armes That The Tie Rods Connect To,i Heated Them Cherry Red And Bent Them To The Center,that Way The Inside Tire Cuts A Shorter Radious,i Might Go Ahead And Mount The Honda Clone 6.5 Hp,with A Comet V Drive Setup.and The Color Is The Brightest Red I Can Find,i Think I Have Some Viper Red Left Over From My Sunbeam Tiger Clone...i Need A Wiring Diagram For The 110 Honda Clone,it Is A Replacement For ?? And The Wire Plugs Are Set Up To Plug And Play, If You Have The Other End...i Will Be Gone From Dec 10 To Dec 17 Going On A Cruise...down Mexico...way, I Want To Buy A Rolex Clone...cheap $$ How Do You Post The Nos Fello On Your Title ? I Have A Small Bottle That Came Out Of The Keg,could Use It As A Clone Nos Bottle...and Fake It On The Bs Got A Sticker About 2 X 2 ? I Am Collecting Stufffff For A Radio Flyer Next...i Like The One With A Arms Etc...,i Have Burris Dirt Tires 12 X 9 X 6 , And Van-k 9 X 6 Wheels,for The Back.would Like 10" ??wheels Wayne

I am looking for wiring schematic for a 125 cc clone. Did you ever find yours?
Doug