b4 my bsr i made this

[BFORTNER]

here is a radio flyer i built 6 years ago.....i sold it to a good friend and regret it every day since:bigcry: but i still see and ride it every once in a while. enjoy :cheers:

[Snakester]

Very Cool...Without a doubt one of the best that I have seen! I know about missing something that you built and spent so much time on. The second BSR that I built I sold it to a good friend ...He hardly rides it and leaves it in his game room . Every time I see it I think of all the good times that I had with it. Where I lived at the time , I had alot of great places to ride and a neighbor about a quarter mile away had an asphalt Go Kart Track. Your BSR will give you the same pleasure!:thumb: Snakester

[BFORTNER]

thanks snakester
the buddy i sold my radio flyer to is already bugin me about when i'm gona sell my bsr:eek2: but we are gona get together and upgrade the radio flyer soon, he wants a live axle instead of the single side drive thats on it now and also a bigger engine but thats gona be tuff cuz there ain't that much room even for the little 3.5 briggs thats in there now.
any ways thanks again

brett

[moto1fast]

Nice Wagon!! I like it better than any I have seen yet!! Does the suspension work on the rear. I would like some more pics of it!! Could you drop a 6.5 hp down a little lower or is it to close of a clearance to the ground? Just thinking on how to get a bigger engine in it like you wanted! Very Nice!! You do great work man!!:thumb:

[BFORTNER]

thanks moto

the height or ground clearance isn't the problem its the width between the rails on the wagon tub :bigcry: at the widest point on the 3.5 briggs(driveshaft and pull start) it is almost touching the tub on both sides. so in order to put a bigger engine i think i might have to widen the tub itself but by doing that it might loose some of it's bitchen factor of being an original radio flyer wagon, well nothing on it is original:eek2: and besides sheet metal work is not one of my strong points. and the other thing is that my buddy wants to put on a tav to :dizzy: now we really have clearance issues, i think instead of the tub being rectangle after all the mods that need to be done the tub will probably end up being square. oh well we will be working on it after the holidays and we'll figure somthing out.
thanks for the kind words and i'll try to get some more pics.

brett

[moto1fast]

Is the frame that the tub sits on the issue or the tub itself? Is the motor sitting up into the tub close to the crankshaft? Any way you got good enough fab skills to figure that out and know it will lokk great when you get finished!! Let use know when you get started on it and post lots of pics. I want to build one sometime this summer!!

[BFORTNER]

Is the frame that the tub sits on the issue or the tub itself?

YES! BOTH :bigcry:

i'm gona take some measurements from my 6.5 honda clone w/tav and see what we need to do, prolly need to mod the frame width and might be able to make some cutouts on the sides of the tub for everything to fit through. i'll keep you guys posted :thumb:

brett

[b.raven70]

Any recent pics? Have you started making the mods for the 6.5?

[BFORTNER]

Any recent pics? Have you started making the mods for the 6.5?

nope no nothin yet. my buddy that has it has been really busy lately and so have i..... one of these days we'll get to it.

[c.schulz]

Hey Brett,
Did you build that from a set of plans? If so how can I get a set? Id really like to build one of these wagons this winter.

Chris

[BFORTNER]

Hey Brett,
Did you build that from a set of plans? If so how can I get a set? Id really like to build one of these wagons this winter.

Chris

yeah a few years ago i found this site and the guy had plans for sale so i bought them and modified them to my liking, unfortunately i forgot the site but i will try and find the plans.

brett

[c.schulz]

Thanks Brett,
Contact me at my email. c.schulz@charter.net

Chris

[Redrooster]

Hi guys... I think the web site could be www.wagon-works.com hope this helps... by the way awesome wagon that you built...

[BFORTNER]

Hi guys... I think the web site could be www.wagon-works.com (http://www.wagon-works.com) hope this helps... by the way awesome wagon that you built...

DING DING DING!!!!!!!!!!

WE HAVE A WINNER!!!!!!!!!

THATS THE SITE.

THANKS

[VashRazr83]

here is a radio flyer i built 6 years ago.....i sold it to a good friend and regret it every day since:bigcry: but i still see and ride it every once in a while. enjoy :cheers:


Hey did you have plans for that, or all your own...I would love to make one of those next!!!

[Ironfist104]

the wagon works website doesent seem to work.....do you still have the plans for it????

[c.schulz]

the wagon works website doesent seem to work.....do you still have the plans for it????

Brett,
Do you think you still have them? Ill try and give them a call next week to find out if they are still in biz.

Chris

[VashRazr83]

if you all find it out...I am interested

[b.raven70]

Anybody find out if wagon werks is still in business?

[c.schulz]

Found it!!!!!!!!!!!
http://www.wagon-works.com/itmidx2.htm

Chris

[sniffles]

Good find! But man they really price their plans high!
-Jesse

[Ironfist104]

Need to see if somone would have them In PDF format or somthing....

[sniffles]

Does anybody know if they are still in business? If not if someone had it in pdf form could they upload it? Might have to ask permission from wagon-works though.

[Lumpy]

I emailed them 2 weeks ago and they sent me a photocopy of thier brochure, so in answer to your question yes they are still in business from what I can tell

[wickedcreations]

heres a wagon for sale


http://cgi.ebay.com/ebaymotors/radio-flyer-wagon-go-cart-go-kart-barstool-bar-stool_W0QQcmdZViewItemQQcategoryZ90986QQihZ018QQitemZ280161193539QQrdZ1QQsspagenameZWDVW

[RED]

Looks like a Wagon Works plan to me!